Connecting The Camcorder To The Computer - Vivitar DVR 558HD User Manual

If you have internet access, the "Choose your language" window opens, choose your language
5)
and click "Next" to open the next window.
Select your camcorder model from the list and click "Next" to open the next window.
6)
Click "Next" to confirm your camcorder model selection and to install the application.
7)
8) Please wait while the application is being installed on your computer.
9) Please review the license terms.
On PC and Macintosh: Click the "I accept the terms of this license agreement" and then click
"Next" to continue.
10) On PC only: Let the "Vivitar Experience Image Manager" installer create the folder to where the
program will be installed, and then click "Install".
11) Please wait while the application continues the installation process on your computer.
On Macintosh: If needed, please follow instructions to install the Adobe® Flash® Player.
12) On PC: Click the "Close" button when the installation is complete.
The application will automatically open.
13) On Macintosh: Click the "Quit" button when the installation is complete.
Click the "Launch Vivitar Experience Image Manager" to open the application
14) If you close the application you can run the Vivitar Experience Image Manager from the
Programs (PC) or Application (Mac) menu on your computer.

Connecting the Camcorder to the Computer

1) Use the supplied USB cable to connect your camcorder to your computer.
Insert the smaller end of the USB cable to the camcorder and the larger end to the computer's USB
port.
2) Power the camcorder on.
3) The first time you connect the device to the computer you will have to wait a few seconds until the
computer recognizes the device.
51