Checking The Coin-Cell Battery - Lenovo ThinkPad 13 Hardware Maintenance Manual

Move your pointer to the battery-status icon in the Windows notification area to check the battery status.
The battery-status icon displays the percentage of battery power remaining and how long you can use
your computer before you must charge the battery.
To check whether the battery charges properly during operation, do the following:
1. Discharge the battery until the remained battery power is less than 50%.
2. Connect the computer to ac power to charge the battery. If the battery status icon in the Windows
notification area indicates that the battery is not charging, remove the battery and let it return to room
temperature.
3. Reinstall the battery. If the battery is still not charging, replace the battery pack.
4. Check the battery status icon again. If the same error still exists, replace the system board.

Checking the coin-cell battery

To check the coin-cell battery, do the following:
1. Disconnect the battery connector. See "Disabling the built-in battery" on page 60.
2. Remove the coin-cell battery. See "1060 Coin-cell battery" on page 70.
3. Measure the voltage of the coin-cell battery. See the following illustration.
• If the voltage is correct, replace the system board.
• If the voltage is not correct, replace the coin-cell battery.
• If the coin-cell battery discharges quickly after replacement, replace the system board.
28
ThinkPad 13 Hardware Maintenance Manual
Wire Voltage (V dc)
Red +2.5 to +3.2
Black
Ground