Change Bands (Band); Automatic Music Search (Ams); Track Search; 14. Mute - Boss Audio Systems 460BRGB User Manual

OPERATION
In the USB or SD card mode:
Briefly press the
>>I
or
I<<
button to play the the next or previou track.
Press and hold the
>>I
or
I<<
button to fast forward or fast backward.
13.BND/AMS
In radio mode,short press the BND/AMS button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1 ,AM2 in a cycle sequence. When you select a band, the word F1, F2, F3 for FM band,
and A 1, A2 for AM band will be shown on the LCD display.
Press the BND/AMS button for several seconds, the radio searches form the current frequency and check
the signal strength until one cycle search is finished. When the 6 strongest stations will be stored into
the corresponding preset number within the current band. Short press the AMS button on the remote
control to scan each preset station in each band.
During USB or SD playback, short press the BND/AMS button to enter track search mode, then rotate
the VOL knob to select the number of your favorite track with high speed, then press the SEL button to
confirm and play the selected track. If no any operation in 5 seconds, it will play the current track.
14. MUTE
Short press the MUTE button to turn MUTE ON/OFF, when it is on, the MUTE will be flash on the LCD
and no sound output. When short press again it will be cancelled.
15. USB PORT
16. AUXIN JACK
17.£
If you want to insert or remove the SD, reset the unit, remove the front panel from the head unit,
press the £ button to detach the front panel.
18.RESET
To reset all parameters to factory default values. Press the£ button to detach the control panel form
the head unit and remove the control panel, then use a subject with a sharp point end to thrush the RESET
hole.
..