Dell Latitude E7270 Owner's Manual page 44

Option Description
Default setting: Not set
Internal HDD-2 Allows you to set, change, or delete the administrator password.
Password
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to determine the minimum and maximum length of Administrator and System passwords.
Configuration
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when
they are set. The options are:
•
•
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin
password is set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator
Changes Password is set. If disabled the setup options are locked by the admin password.
TPM 1.2/2.0 Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
Security
•
•
•
•
•
•
Computrace Allows you to activate or disable the optional Computrace software The options are:
•
•
•
Default setting: Deactivate
44
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Disabled
Reboot bypass
TPM On (enabled by default)
Clear
PPI Bypass for Enabled Commands
PPI Bypass for Disabled Commands
Disabled
Enabled
NOTE: To upgrade or downgrade TPM1.2/2.0, download the TPM wrapper tool (software).
Deactivate
Disable
Activate
NOTE: The Activate and Disable options will permanently activate or disable the feature and no
further changes will be allowed