Powering On/Off Your Digital Camcorder; Changing Camcorder Mode - Vivitar DVR 508NHD User Manual

Powering ON/OFF Your Digital Camcorder

Make sure the batteries have been inserted properly into your digital camcorder.

Make sure an SD card (up to 32GB) has been inserted into your digital camcorder.

Note: SD Card not included and batteries not included.
Powering the Digital Camcorder ON
Press the Power button to turn your digital camcorder ON.
The camcorder will be in Video Capture mode to start.
Powering the Digital Camcorder OFF
While the camcorder is on, you can press the
camcorder OFF. You will see a "Goodbye" splash screen and then the camcorder will power off
completely.
Note: Your digital camcorder also has an Auto Power Off feature that automatically turns off your
camera after a specific period of time that your camcorder is left idle. The Auto Power Off can be set
from the Auto Power Off settings menu.

Changing Camcorder Mode

Your camera has three main modes:
1) Video Capture Mode - Use this mode to capture videos with your camera.
2) Photo Capture Mode - Use this mode to capture photos with your camera.
3) Playback Mode (for photos and videos) - Use this mode to view the photos and videos you have
already taken with your camera.
When the camcorder is first powered ON, the Video Capture Mode will be active. The icons that
appear on the LCD screen are the best default settings so that you can begin to capture and enjoy
clear quality photos.
Power button again at any point to turn your
10