Samsung SGH-B300 Service Manual page 11

5
SCREW 2 point
1) Screw up two screws at FOLDER LOWER.
2) Put in screw caps.
※ Caution
1) Be careful not to make scratch and molding
damage!
7
1) Set KEYPAD on the FRONT.
※ Caution
1) Check the KEYPAD's guide hole.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Insert F-PCB to hole of FRONT.
2) Assemble while pressing the hinge.
※ Caution
1) Beware that you do not damage F-PCB
when you insert F-PCB to hole of FRONT
2) Open and close a folder 2~3 times to
Check there is a problem or not.
8
1) Set a PBA.
2) Connect RF CONNECTOR.
※ Caution
1) Be careful not to make scratch and molding
damage!
7-5
Exploded View and Parts List
LCD
CONNECT
OR
PBA
HOOK
2 POINT