Advertisement
Main Unit
[VOL] (Volume)
Remote Control Sensor
BAND
CQ-C1301W
APM
PWR
CLOCK
MUTE
SCROLL
RANDOM
SCAN
REPEAT
SQ
SRC
SRC
DISP
1
2
3
4
5
6
[SRC] (Source)
[MUTE]
[SQ] (Sound Quality)
selects a source.
toggles mute on/off.
selects a sound type (SQ).
(PWR) (Power)
toggles power on/off.
Power On/Off
SQ (Sound Quality)
Set your car's ignition switch to the ACC or ON position.
SQ is a function that can call up various sound types at
the touch of button in accordance with your listening
Power on: Press [SRC] (PWR).
music type.
Power off: Hold down [SRC] (PWR) for more
Press [SQ] to select the sound type as follows:
than 1 second.
(FLAT) flat frequency response:
does not emphasize any part. (Default)
Source Selection
Press [SRC] to change the source.
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
Radio
Disc Player
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly empha-
Volume Adjustment
sizes treble.
(Setting Range: 0 to 40, Default: 18)
Turn [VOL].
Note: Settings of SQ, bass and treble are influenced one
another. If such an influence causes distortion to the audio
Mute
signal, readjust bass/treble or volume.
ON: Press [MUTE].
(
lights.)
OFF: Press [MUTE] again.
Remote Control Unit
Note: This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)
[BAND]
[0] to [9]
selects a band in the tuner source,
selects a preset station (1 to 6),
toggles pause/play in player source,
presets the current station (Hold it down for more
executes the APM in tuner source (Hold it down for more than 2 seconds.).
than 2 seconds.),
inputs the number in direct selection.
[#] (NUMBER)
[SRC] (SOURCE)
[MENU] (SEL: Select)
executes the direct selection.
selects a source.
selects the items in the audio menu.
[RANDOM] [SCAN] [REPEAT]
(POWER)
toggles on/off each play mode.
toggles power on/off.
[
]
] [
[
]
down/up the frequency (Hold it down for more
than 0.5 seconds and release it for seek tuning.).
POWER
SOURCE
MENU
[
] [
]
{
}
SEL
SEL
SEL
SRC
SRC
[VOL] (Volume)
skip to the previous/next folder in player mode.
VOL
VOL
VOL
SET
adjusts the volume,
BAND
BAND
MUTE
MUTE
MUTE
[6] [7]
and selects the value in the audio menu, etc.
1
1
2
2
3
3
skip to the previous/next track/file in player mode.
RANDOM
SCAN
REPEAT
Hold it down for fast reverse/fast forward.
4
4
5
5
6
6
[MUTE]
7
7
9
9
8
8
toggles mute on/off.
TUNE
TUNE
#
#
0
0
DISP
DISP
NUMBER
[DISP] (Display)
switches the information on display,
CAR AUDIO
and exits the audio menu.
Direct Access
Battery Replacement
q Remove the battery holder with the
A track (CD mode) and file/folder (MP3/WMA mode) can be
directly selected.
remote control unit placed on a flat
Example: Track number 5
surface.
q Stick your thumbnail into the
1
Press [#] (NUMBER).
groove, and push the holder in
the direction of the arrow at the
2
Press [5].
same time.
w Pull it out in the direction of the
3
Press [BAND] (SET).
arrow using a tough pointed object.
w Put a battery in the case with (+)
Notes:
side facing up.
¡
To suspend direct selection, press [DISP].
e Put the case back.
¡
For folder selection, enter a number after pressing [#]
(NUMBER) twice.
Warning
¡
If there is no playable file in the selected folder, the first
¡Keep batteries away from children to avoid the risk of
file or folder on the disc is selected.
accidents. If an infant ingests a battery, please seek
immediate medical attention.
Functions Only on Main Unit
Caution
The following functions are not available on remote control
¡ Remove and dispose of an old battery immediately.
unit.
¡ Do not disassemble, heat or short a battery. Do not
throw a battery into a fire or water.
¡Demonstration
¡ Follow local regulations when disposing of a battery.
¡SQ selection
¡Improper use of batteries may cause overheating, an
¡Scroll
explosion or ignition, resulting in injury or a fire.
¡Disc eject
Notes:
Battery Information:
Battery Type: Panasonic lithium battery (CR2025) (Included
in the remote control)
Battery Life: Approximately 6 months under normal use (at
room temperature)
Radio (FM/AM)
[BAND]
selects a band in the radio source.
(APM) (
Auto Preset Memory)
executes APM in the radio source. (Hold it
down for more than 2 seconds.)
BAND
BAND
CQ-C1301W
APM
PWR
MUTE
SRC
SRC
SCROLL
RANDOM
SCAN
1
1
2
2
3
3
4
4
5
5
[SRC] (Source)
[1] to [6]
selects a source.
selects a preset station in the radio source,
and presets the current station. (Hold it down
for more than 2 seconds.)
1
3
Press [SRC] to select the radio source.
2
Press [BAND] to select a band.
Disc Player
Disc slot
takes a disc in with the printed side facing up.
Note:
¡
The power will be turned on automatically when a disc is loaded.
¡
A disc which has both CD-DA data and MP3/WMA data on it may
not be reproduced normally.
(y / 5) (Pause/play)
BAND
BAND
CQ-C1301W
toggles pause/play in the
APM
player source.
PWR
SRC
SRC
MUTE
SCROLL
RANDOM
SCAN
REPEAT
1
2
3
3
4
4
5
5
6
6
[SRC] (Source)
indicator
selects a source.
(RANDOM)/(SCAN)/(REPEAT)
toggles on/off each play mode.
(SCROLL)
scrolls the information on display.
Caution
¡ Do not insert foreign objects into the disc slot.
¡ Do not insert a disc when the
indicator lights.
¡ Refer to the section of "Notes on Discs" and "Notes on
MP3/WMA".
¡ This unit does not support 8 cm discs.
Tough pointed object
¡ If you insert an 8 cm disc and cannot eject it, turn ACC of your car
off once and turn it on again, then press [u] (Eject).
w
1
Press [SRC] to select the Disc Player
q
Back side
source.
2
Select a desired portion.
2
Track/file selection
3
Press [6] / [7].
Note: To perform fast forward/reverse, hold down either
of them.
Disc Player (CD-DA disc):
Previous/next track
Disc Player (MP3/WMA disc):
Previous/next file
lights while receiving an FM stereo signal
Band
Frequency Preset Number
CLOCK
SQ
REPEAT
DISP
DISP
[DISP] (Display)
6
6
switches the information on
the display.
[TUNE ]] [TUNE []
Down/up the frequency. (Hold it down for
more than 0.5 seconds and release it for seek
tuning.)
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [1] to [6].
Auto Preset Memory (APM)
With this operation, stations with good receiving conditions can
be automatically stored in the preset memory.
1
Select a band.
2
Hold down [BAND] (APM) for more than 2
Select a station.
seconds.
Frequency adjustment
The preset stations under best receiving conditions are
received for 5 seconds each after presetting the stations
[TUNE]]: Lower
(SCAN). To stop scanning, press one of the buttons from
[TUNE[]: Higher
[1] to [6].
Note: New stations overwrite existing saved stations.
Note: Hold down either of them for more than 0.5 sec-
onds and release it for seek tuning.
Preset station selection
Press the corresponding preset button from [1] to [6] to
tune in a preset station.
[6] [7]
CD-DA mode display
skip to the previous/next track/file in the play-
Play time
Track number
er mode.
Hold down either of them for fast reverse/fast
forward.
[u] (Eject)
Play Mode indicators
ejects the disc.
MP3/WMA mode display
lights when folder random/repeat/scan is on.
CLOCK
Folder number
File number
[DISP] (Display)
SQ
DISP
DISP
switches the information on
the display.
[
] [
]
}
{
skip to the previous/next folder in MP3/WMA mode.
Play Mode indicators
Folder selection (MP3/WMA)
Press [
{
] / [
}
].
Random play
All the available tracks/files are played in a random sequence.
Pause
Press [4] (RANDOM).
Press again to cancel.
Press [BAND] (y / 5).
Folder random play (MP3/WMA)
Press again to cancel.
All the available files in current folder are played in a random
sequence.
Hold down [4] (RANDOM) for more than 2
seconds.
Hold down again to cancel.
Repeat play
The current track/file is repeated.
Press [6] (REPEAT).
Press again to cancel.
Audio Settings
[VOL]
Display change
selects a value in the audio menu.
(PUSH SEL) (Push to Select)
Press [DISP] to change the display.
selects items in the audio menu.
Radio mode display (Default)
Clock display
1
Press [VOL] (PUSH SEL) to display the audio menu display.
Note: If no operation takes place for more than 7 seconds in the audio menu (2 seconds in Main volume adjust-
ment), the display returns to the regular mode.
2
Press [VOL] (PUSH SEL) to select a
mode to be adjusted.
Manual station preset
(Setting Range: 0 to 40, Default: 18)
1
Tune into a station.
2
Hold down one of the preset buttons from
to
for more than 2 seconds.
[1]
[6]
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
(blinks once)
(Setting Range: –12 dB to +12 dB by 2 dB,
Default: 0 dB)
Note: New stations overwrite existing saved stations.
(Setting Range: 15 levels each, Default CNT (cen-
ter))
(Setting Range: 15 levels each, Default CNT (cen-
ter))
Note: If the fader is set to front, the pre-amp. output
(rear) is decreased.
Troubleshooting
If You Suspect Something Wrong
Display change
Check and take steps as described below.
If the described suggestions do not solve the problem, it is recom-
Press [DISP] to change.
mended to take the unit to your nearest authorized Panasonic
Disc Player (CD-DA disc) Disc Player (MP3/WMA disc):
Servicenter. The product should be serviced only by qualified person-
Normal
Normal
nel. Please refer the checking and the repair to professionals.
Panasonic shall not be liable for any accidents arising out of neglect
of checking the unit or your own repair after your checking.
Disc title
Play time
Track title
Folder name/
Check point
Trouble
Album*
Clock
File name/
Common
Title, artist*
●
Start the engine. (Or turn the ignition
Clock
switch to the ACC position.)
●
Verify the wiring. (battery lead, power
*ID3/WMA Tag On/Off
lead, ground lead, etc.)
Hold down [3] for more
No power
●
Fuse blown (Contact the nearest
than 2 seconds.
Panasonic Service Center.)
●
Ask a professional for fuse replacement.
●
Be sure to use the same rated fuse.
album title and song title
/artist name are displayed.
●
Disable the mute function.
●
Verify the wiring.
No sound
(Default)
●
Wait until the dew disappears before
folder name/file name are
turning on the unit.
displayed.
●
Make sure that grounding is established
Note:
Noise
properly.
¡
For scrolling text, press [3] (SCROLL) .
¡
"NO TEXT" is displayed when there is no information on the
No sound from
●
Adjust the balance and fader.
disc.
left, right, front,
●
Verify the wiring.
or rear speaker
Left and right
Folder repeat play (MP3/WMA)
●
sounds are
Connect the speaker lead correctly.
reversed
The current folder is repeated.
Hold down [6] (REPEAT) for more than 2
Disc Player
seconds.
No sound, or disc
●
Load the disc correctly.
is automatically
Hold down again to cancel.
●
Clean the disc.
ejected
Scan play
Sound skip,
The first 10 seconds of each track/file is played in sequence.
●
poor sound
Clean the disc.
Press [5] (SCAN).
quality
Press again to cancel.
Sound skip
●
The maximum permissible tilt angle is
Folder scan play (MP3/WMA)
due to
30°.
●
vibration
Secure the unit.
From the next folder, the first 10 seconds of the first file in
each folder is played in sequence.
●
Press [
u
]. If the disc is still not ejected,
Disc
Hold down [5] (SCAN) for more than 2 sec-
contact the nearest Panasonic Service
unejectable
Center.
onds.
Hold down again to cancel.
BAND
CQ-C1301W
APM
PWR
CLOCK
MUTE
SCROLL
RANDOM
SCAN
REPEAT
SQ
SRC
DISP
DISP
1
2
3
4
5
6
[DISP] (Display)
exits from the audio menu.
3
Turn [VOL] clockwise or counterclock-
wise to adjust.
Volume
q :
Up
w :
Down
Bass
q :
Increased
w :
Decreased
Treble
q :
Increased
w :
Decreased
Balance
q :
Right enhanced
w :
Left enhanced
Fader
q :
Front enhanced
w :
Rear enhanced
Warning
¡ Do not use the unit in an irregular condition, for example, with-
out sound, or with smoke or a foul smell, which can cause
ignition or electric shock. Immediately stop using the unit and
consult your dealer.
¡ Never try to repair the unit by yourself because it is dangerous
to do so.
Check point
Trouble
Radio
●
Tune in to another station of high-inten-
Frequent
sity waves.
●
noise
Make sure that the antenna mounted
point is grounded properly.
●
The preset memory is cleared to return
Preset data
to the original factory setting when the
deleted
power connector or battery is discon-
nected.
Error Display Messages
(The disc is ejected automatically.)
The disc is dirty, or is upside down.
●
Check the disc.
(The disc is ejected automatically.)
The disc has scratches.
●
Check the disc.
No operation by some cause.
●
If normal operation is not restored, con-
sult your dealer or the nearest Service
Center to ask for repairs.
Cannot read the file
●
Check the file.
A WMA file can be copyrighted.
●
The file protected by copyright is not
playable.
Advertisement
