Vivitar 508v3 User Manual page 7

POWERING ON THE DIGITAL CAMCORDER
Flip open the LCD screen and press the
CAMCORDER INITIAL SETUP
Flip open the LCD screen and press the POWER button to power. When powering the camcorder
on for the first time the camcorder will take you through the initial setup.
SETTING THE CAMCORDER LANGUAGE
1) You will first be prompted to select a language for the digital camcorder.
The Language selection menu appears.
2) Press the UP or DOWN button to select the language of your choice.
3) Press the OK button to confirm the selection.
4) After selecting a language, you will be asked if you would like to continue with the initial
camcorder setup. The following message appears: "Continue with Camera Setup?"
Select "Yes" to continue or "No" to exit the setup.
Note: If you select "No" and decide to leave the setup, the camcorder will be set to its default
settings. These settings can be adjusted at any time manually through the menus of the
camcorder.
SETTING THE DATE AND TIME
The next step in the initial camcorder setup is to set the date and time.
POWER button to turn on the digital camcorder.
6