Step Three: Operate The Sprayer - North Star M282737F Owner's Manual

Operation - Using the Sprayer (continued)

Step Three: Operate the sprayer.

ALWAYS wear personal protective equipment as directed on the
chemical label when spraying.
Long pants and sleeves, chemical-resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required
depending on the particular pesticide.
1. Review safety
information
2. Wear personal
protective
equipment
3. Open priming
valve
4. Turn on power
5. Ensure flow
through priming
hose
WARNING
Review the "Operation – Important Safety Information" related to Chemical
Application Safety and ATV Vehicle Handling Safety provided in this manual.
Wear personal protective equipment as directed on the chemical label.
WARNING: Wear additional personal protective equipment if you will be
spraying overhead or fogging. You will be exposed to much more pesticide
fallout in these applications. Wear chemical resistant head and neck protection,
full facemask or half facemask with sealed goggles, and consider using a
dust/mist respirator.
Turn priming valve lever so that it is in-line with the priming hose.
Priming
valve lever
Priming
hose
Turn on the power to the sprayer.
1. Verify the battery power cord is connected to the remote switch power cord
and that the remote switch power cord is connected to the pump power cord.
2. Turn the remote switch to the "ON" position.
Note: The pump will start automatically when power is turned on. Running
the pump dry will void all warranties.
Once chemical is flowing through the priming hose, close the priming valve.
Priming valve
26
01542
01542