Description; Bu Kullanım Kılavuzunun Metninde »Cihaz« Daima Ud - Hilti UD 16 Operating Instructions Manual

Obligation signs
Wear a hard Wear eye
hat protection
en
Wear Read the
protective operating
gloves instructions
before use.
Symbols
1
Return Drilling, 1st
materials for gear
recycling
Hertz Volts
Double Revolutions
insulated per minute

2 Description

2.1 Use of the product as directed
The power tool is a hand-held, mains-powered electric drill for drilling in wood and metal and for screwdriving.
Under certain conditions, the power tool is also suitable for mixing (see "Applications").
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction,
where the types of work listed above may be carried out.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Modification of the power tool or tampering with its parts is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The power
tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not
as directed.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Observe the national health and safety requirements.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool may be used only in a dry environment.
16
Wear Wear ear
breathing protection
protection
2
Drilling, 2nd Amps
gear
Watts Alternating
current
Location of identification data on the power tool
The type designation, item number, year of manufacture
and technical status can be found on the type identific-
ation plate on the machine or tool. The serial no. can
be found on the underside of the motor housing. Make
a note of this data in your operating instructions and
always refer to it when making an enquiry to your Hilti
representative or service department.
Type:
Serial no.: