Focus Rubber Ring - Sony SAL16105 Service Manual

HELP02-03
1. Set the focus to near position.
2. Position the projection as shown below by turning the focus differential ring.
3. Install the fixed barrel assy to the inner barrel assy.
Note :
Install so that the projection of focus differential ring engages with lever of the focus ring and the boss of the fixed barrel assy
engages with the hole for dowel on the fixed barrel.
Note :
Be careful about the aperture operate plate lever is not to touch the fixed barrel assy.
Fixed Barrel Assy,

Focus Rubber Ring

Set the focus to near position.
Inner Barrel Assy,
Focus Differential Ring
4. Confirm the focus differential ring moves synchronously with the focus operation ring moving by turning the focus operation ring to
the both directions (near ↔ infinity).
Turn focus operation ring
to the both directions (near
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Lever of the
Focus Ring
Turn the Focus
Differential Ring
Projection
infinity).
Aperture Operate
Plate Lever
Fixed Barrel
Focus Differential Ring
Lever of the
Focus Ring
Fixed Barrel
Assy
Boss
Screw Hole
Focus Differential
Ring
Projection
Screw Hole
Hole for Boss
HELP