Shoot A Still Image While Recording A Video Clip - Sanyo VPC-CG6EX Instruction Manual

SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP

You can capture a still image while recording a video clip.
1
Turn on the camera (page 26).
2
Press the [
h Recording begins.
3
When you see a scene you'd like
to capture as a still image, press
the [
h A still image is captured.
4
End the recording.
h Press the [
recording.
HINT
i When shooting a still image while recording a video clip, the flash does not
operate.
i When shooting a still image while recording a video clip, the display briefly
pauses, and then returns to the video clip display after the still image is
captured.
i If the still image resolution is set to k or Q, it automatically changes to
x and the image is captured.
i When the remaining video recording time becomes approximately
50 seconds, it will no longer be possible to capture a still image while
recording a video clip. The exact remaining recording time at which this
occurs will differ depending on the subject and on the video clip mode
setting (page 65). If you intend to capture a still image while recording a
video clip, it is suggested that you take note of the remaining video
recording time.
Downloaded From VideoCamera-Manual.com Manuals
] button.
] button.
] button to stop
[ ] button
[ ] button
REC 00:00:09 REC 00:00:09 REC 00:00:09
English
52