Special Function - Honeywell HZC-755N/P Series Operation Manual

<< SPECIAL FUNCTION >>
① MIRROR
② SHARPNESS
③ NEGATIVE
④ COLOR
⑤ FREEZE
⑥ BAUDRATE
⑦ F.OSD DISP
⑧ LANGUAGE
RETURN
<Fig5-12. SPECIAL FUNCTION >

5.12 SPECIAL FUNCTION

① Mirror Mode
: Mode ON is Mirror Mode, OFF is general screen state.
OFF → H MIRROR → V MIRROR → FLIP . . . .
MIRROR
② Sharpness
: Use to change the contour of Scene.
SHARPNESS 0 ~ 15
③ Negative Mode
: Use for Positive and Negative mode. ON is Negative mode, OFF is
Positive mode namely general screen state.
OFF → ON → ....
NEGATIVE
④ Color Mode
: Use for changing color and monochrome ( black & white )mode .
ON is Color mode, OFF is black&white mode.
ON → OFF → ....
COLOR
⑤ Freeze Mode
: It pause current image. ON is to stop, OFF is to return to normal state.
ON → OFF → ....
FREEZE
☞ caution
1. Freeze image is not saved after Power OFF / ON .
That's why it doesn't have memory for saving.
⑥ BAUD RATE
OFF
☞ caution
10
OFF
ON
⑦ Function OSD Display
OFF
9600bps
ALL
ENGLISH
⑧ OSD language
5.13 Initial Set
☞ caution
- 17 -
: Use to communicate through RS232C, RS485, RS232TTL .
BAUDRATE 4800bps → 9600bps → .... → 312kbps
1. When Baud Rate of Camera and external system is not same,
it happens Communication fail.
OSD DISP ALL → NONE → TOP → BOTTOM → ....
ALL : Whole Function OSD display
( Focus Mode, Key state, Zoom Ratio, ID )
TOP : Only Upper OSD display ( Focus Mode, key state )
BOTTOM : Only Lower OSD display ( Zoom Ratio, ID )
NONE : Whoe Function OSD display not.
LANGUAGE ENGLISH → CHINESE → ....
: Set the INITIAL SET Mode ON so that all changed data are returned to
shipping condition. For Initialization, select "YES?" by using NEAR,
FAR key and push MENU key. Select "NO?" and push MENU,
no initialization and return to Main Menu.
1. Make sure when Initialization set as "YES?" , all changed data are
return to shipping condition.
2. Some menu as ID,TITLE, etc are not initialized.