Table of Contents
Advertisement
Harman Kardon
to delete a programmed or learned code:
1.
Access the remote's menu system by pressing and holding the AVR
Settings Button for 3 seconds, until the "Main Menu" and "Program
Device" messages appear in the LCD Display.
2.
Use the
KL
Buttons to select "Learn" from the remote's main menu, and
press the OK Button.
3.
When the "Learn Menu" message appears in the upper line of the LCD
Display, scroll to the "Learn Delete" option, and press the OK Button.
4.
The Learn Delete menu offers the options of deleting a single learned key
code, an entire device or all devices. Scroll to the desired option and press
the OK Button.
•
To delete an individual key code, the remote will first prompt you to
select the device containing the key code, then prompt you to press
the key. It will confirm the deletion, then offer you the opportunity to
delete another learned key or exit the delete key function.
•
To delete an entire device, the remote will prompt you to select the
device. When you scroll to the device and press the OK Button, the
remote will confirm the deletion and exit its programming mode,
returning to normal operation.
•
To delete all devices, wait a few moments while the remote deletes all
programmed device codes. It will then return to normal operation.
to rename a key or device:
If you wish to change the name of a device or key as it appears in the LCD
Display, follow these steps:
1.
Access the remote's menu system by pressing and holding the AVR
Settings Button for 3 seconds, until the "Main Menu" and "Program
Device" messages appear in the LCD Display.
2.
Use the
KL
Buttons to select "Rename" and press the OK Button.
3.
Use the
Buttons to select whether to rename a device or a key, and
KL
press the OK Button.
4.
Use the
Buttons to select the device, either to rename the device
KL
itself or a key function used by that device, and press the OK Button.
5.
The current name of the device or key will appear on the lower line of the
LCD Display, with the cursor at the end of the line.
Use the
Button to move the cursor to the beginning of the name, then
M
type over the current name using the Alphanumeric Keys.
Each Alphanumeric Key has the characters available in addition to its
number printed above the key. Each press of the key scrolls through the
available characters. To move to the next character, either press the
Button or press the next desired Alphanumeric Key.
Press the OK Button to finish, and the remote will prompt you to rename
another key or device, or to exit.
Step fIfteen – turn on the aVr 760/aVr 660
Two steps are required the first time you turn on the AVR 760/AVR 660.
1.
Flip down the Front-Panel Door and press the Main Power Switch in. The
Power Indicator on the front panel will turn amber, indicating that the
AVR is in Standby mode and is ready to be turned on. Normally, you may
leave the Main Power Switch on, even when the receiver is not being
used.
2.
There are several ways to turn on the AVR from Standby mode.
a)
Press the Standby/On Switch on the front panel.
b)
Using the remote, press the AVR Power On Button or any of the Source
Selectors.
NOTES:
•
Any time you press one of the Source Selectors on the remote, the
remote will switch device modes. To control the receiver, press the AVR
Settings Button. Some AVR functions are available in all device modes:
Volume Controls (including Mute), Audio Effects, Video Modes, Surround
Modes, AVR Settings, Info Settings, Sleep Settings and AVR Power On
and Off.
•
If you do not see a picture within about 1 minute, refer to the
Troubleshooting Tips on page 37.
N
INSTALLATION
Video
25
Page 24 of 264
Hide quick links:
Advertisement
Table of Contents
