Vcr Dvd Player - Panasonic Viera TH-58PZ850A Operating Instructions Manual

Panasonic equipment connected to the TV can be directly operated with the remote control.
POWER
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
POWER
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
"VCR" position
Equipment
VCR 10 (default)
DVD
Note
•
Confi rm if the remote control works correctly after changing the code.
•
The codes will be reset to default values if batteries are replaced.
•
"DVD" means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
"DVD" position
Code Equipment
DVD
11 Player home theatre
Press
Code
70 (default)
71
21