Faqs - Panasonic Viera TH-42PX8A Operating Instructions Manual

Panasonic plasma television operating instructions
Hide thumbs Also See for Viera TH-42PX8A:
Table of Contents

Advertisement

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer for assistance.
White spots or shadow
images (noise)
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
Is the TV in "AV mode"?
Is the mains lead plugged into the socket
outlet?
Is the TV turned On?
Check Picture Menu (p. 24) and volume.
An error message appears
Follow the message's instructions.
If the problem persists, contact the
authorized Service Centre.
"VIERA Link" function
does not work and an
error message appears
Confi rm the connection.
Turn the connected equipment on and then
switch the TV on. (p. 36)
Problem
Chaotic image, noisy
No image can be displayed
Blurry or distorted image
(no sound or low volume)
Unusual image is displayed
"Shop" appears on screen at
switch on
No sound is produced
Sound level is low
or sound is distorted
Contrast is reduced
Contrast is lowered in the following conditions without any
user operation for a few minutes:
● no signal in DVB or AV mode
● selected invalid programme
● selected radio service
● displayed menu
Pixel Statement
An image on a LCD or Plasma TV screen is created by many small
groups of dots known as pixels (which is similar to the image in a
newspaper). It also naturally follows that higher panel resolutions
contain more pixels. To create a colour image, each pixel consists
of three tiny coloured dots (known as sub-pixels), one each of red,
green and blue. Each one of these dots is precisely controlled by
the electronics of the TV to produce the picture.
Whilst Panasonic maintains the highest standards in manufacturing
technology and processes in the construction of these panels,
there are a number of allowable pixel/subpixel failures that still
allow the panel to be defi ned as a good panel. It is not possible to
guarantee absolutely no pixel loss.
Set "P-NR" in the Picture Menu (to remove noise). (p. 24)
Check nearby electrical products (car, motorcycle, fl uorescent
lamp).
Is "Colour" or "Contrast" in the Picture Menu set to the minimum?
(p. 24)
Reset programme. (p. 31)
Turn off the TV with Mains power On / Off switch, then turn it on
again.
"Shop" was selected in "Auto Tuning" (p. 12).
Reset settings in "Shipping Condition" (p. 32), then select "Home"
in "Auto Tuning" (p. 12).
Is "Sound mute" active? (p. 11)
Is the volume set to the minimum?
Sound signal reception may be deteriorated.
Set "MPX" (p. 24) in the Sound Menu to "Mono".
Actions
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents