Panasonic TH-42PX60X Operating Instructions Manual page 5

Accessories/Options
2
Setting-up
Bottom view
Television unit
Rear side
Arrow mark
Pole
Pedestal
Label
3
Stopping the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
For 37'', 42'', 50'' Plasma television
Accessories for pedestal security
1 Band (2) 2 Screw (2)
Nominal diameter
4 mm x 12
Securing to a base
Front
Front
D
Wood Worktop
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
8
* Place pedestal on
Lift the television unit above the pedestal,
a horizontal and
with the back of the television unit on
level surface.
the same side as the pedestal Label.
Then align the holes in the television unit
(bottom) with the poles of the pedestal and
lower the television unit into place.
Use the assembly screws
fasten securely.
Hole for installation
pedestal
Pole
3 Wood screw (2) 4 Clamp (2)
Securing to a wall
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps 4 to the
plasma TV using the
removed screws.
Screws on main body
Securing method
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.
Accessories for pedestal security
1 Band (4)
(M5 x 30) to
B
Securing to a base.
Front
Wood
Worktop
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
For 58'' Plasma television
Hook (2)
2 Screw (4) 3 Wood screw (4) 4
Nominal diameter
4 mm x 12
Securing to a wall.
Hook
Hook securing
screw 5
• Securing method
Hook
Hook securing
5
screw (2)
M8 x 35
* Use a flat-head screwdriver
to remove the caps at the left
and right top on the rear side
of the plasma TV, and attach
the hooks 4 to the plasma
TV using the hook securing
screws 5 . (Keep the caps
you have removed in a safe
place.)
* Use a strong wire or chain
which is commercially
available to secure the hooks
4 to a solid area of the wall
or pillar.
9