Panasonic TH-42PV60A Operating Instructions Manual page 15

•
Basic picture mode (Dynamic / Standard / Cinema / Auto)
Set for each input signal
Adjusts colour, brightness, etc. for each picture mode to suit your taste
•
Adjusts tint of image
• For NTSC signal reception only
Item will be changed to "Tint" when receiving YUV(60Hz) or HDMI(60Hz) signal
Chooses the colour balance of the entire image (Cool / Standard / Warm)
Automatically adjusts colours to vivid ones (Off / On)
• Automatically reduces unwanted picture noise (Off / Strong / Weak / Auto)
Set to Off when receiving a strong signal or AV input
Automatically reduces noise for watching DTV, DVD and VCD
(Off / Strong / Mid / Weak)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on S-Video, components, PC and HDMI
Basic sound mode (Music / News / Cinema)
•
Set for each input signal
Adjusts the output volume
Adjusts the output level of deep bass, high-pitch, shrill sound for each sound mode
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Gives a greater spatial effect by using dynamic enhancer (Off / On)
•
Switching is also possible by SURROUND button on the remote control
Chooses according to the signal when HDMI is connected
(Auto / Digital / Analogue) (p. 26)
•
HDMI2 terminal is for digital signal only
Control with HDMI function (p. 20)
Teletext display mode (TOP / List) (p. 12)
Sets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)
•
Switching is also possible by OFF TIMER button on the remote control
Colour density varying between broadcast channels can be adjust to three levels for
each reception channel
•
Display the channel you want to adjust and set this function
Child lock can be set for each channel and each AV mode
Image and sound are not available during Child lock On (Black screen will appear)
•
Display the channel or AV mode you want to lock and set this function
Increases the brightness of the side panel (Off / Low / Mid / High)
•
The recommended setting is High to prevent panel "after-image"
Reduces brightness of picture to economise on power consumption (Off / On)
Edits or sets channels (p. 16)
Inputs the owner ID (p. 18)
Selects optional colour system based on video signals in AV mode
Displayed during AV mode
Available only with 480p or 576p input signals in a natural colour from digital equipment
connected to AV2 / AV3 Component or HDMI1 / HDMI2 terminals
Select SD or HD to adjust suitable colour parameters for SD (standard defi nition) or HD
(high defi nition)
•
SD: Input signal is a normal TV system
•
HD: Input signal is a High-Defi nition system
•
A different menu will be displayed while PC is used.
•
In AV mode, the Sound menu and Setup menu change a number of options.
Adjustments / Confi gurations (alternatives)
Menu
Contrast
Brightness
Colour
Sharpness
NTSC-Tint
Colour temperature
Colour management
D. PNR
MPEG NR
3D-COMB
Menu
Volume
Bass
Treble
Balance
Headphone volume
Surround
HDMI1 input
HDMI setting
Teletext
Off timer
Ch colour set
Child lock
Side panel
Power save
Tuning menu
Owner ID
Colour system
Colour matrix
(p. 19)
Dynamic
Standard
On
Auto
Off
On
Music
Off
Auto
Access
TOP
Off
Off
Off
Off
Access
Access
Auto
SD
15