Securing The Tv; Assembling The Pedestal - Panasonic TH TH-42PZ800A Operating Instructions Manual

Panasonic plasma television operating instructions
Hide thumbs Also See for TH TH-42PZ800A:
Table of Contents

Advertisement

Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become
damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become
damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or
physically damaged.
If you use the pedestal while it is physically damaged,
personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are
securely tightened.
If insuffi cient care is taken to ensure screws are
properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might
fall over and become damaged, and personal injury
may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the
pedestal with the TV installed, the TV may fall over
and personal injury may result.
Two or more people are required to install and
remove the TV.
If two or more people are not present, the TV may be
dropped, and personal injury may result.
Assembly screw (4)
(silver)
XYN5+F18FN
M5 × 18 mm
Pole (2)
L:TBLA3615
R:TBLA3614
L
R

Assembling the pedestal

Use the four assembly screws
and right poles to the base securely.
Make sure that the screws are securely tightened.
Forcing the assembly screws the wrong way will
strip the threads.
"L" or "R" mark is stamped on the bottom of the
pole.
R
D
Attaching the pedestal
Assembly screw (4)
(black)
THEL060N
M5 × 25 mm
Base
TBLX0047-1
(TH-42PZ800A)
TBLX0048-1
(
)
TH-46PZ800A
TH-50PZ800A
to fasten the left
A
M5 × 18 mm
L
Front

Securing the TV

Use the assembly screws
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level
surface.
View from the bottom
M5 × 25 mm
B
Arrow mark
Hole for pedestal
installation
Adjust the panel to your desired angle
Ensure that the pedestal does not hang over the edge
of the base even if the TV swivels to the full rotation
range.
Do not place any objects or hands within the full
rotation range.
Set the mark at the centre as illustrated, to
have the swivel positioned at the centre of
the rotation angle.
b
c
(View from the top)
TH-42PZ800A
a: 521 mm / b: 425 mm / c: 15°
TH-46PZ800A, TH-50PZ800A
a: 513 mm / b: 453 mm / c: 10°
to fasten securely.
D
c
a
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viera th-46pz800aViera th-50pz800aViera th-42pz800a

Table of Contents