System Requirements; Package Contents - D-Link DAP-2660 Quick Installation Manual

Wireless ac1200 concurrent dual band poe access point

Hide thumbs Also See for DAP-2660:

Table of Contents

Available languages

DAP-2660 Quick Install Guide

This installation guide provides basic instructions for installing the DAP-2660 Wireless Access

Point on your network. For additional information about how to use the Access Point, please

see the User's Manual which is available on the CD included in this package or from the

D-Link support website.

Minimum System Requirements:

• CD-ROM Drive

• an Ethernet port, or an installed Ethernet adapter

• Internet Explorer 7.0, Safari 5.0, Firefox 3.5, Chrome 20 or later versions of these

browsers

ƒ DAP-2660 802.11ac Power over Ethernet (PoE) Access Point

ƒ Mounting Brackets

ƒ Ethernet Cable

ƒ CD-ROM

If any of the above items are missing, please contact your reseller.

NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link

DPE-101GI PoE injector.

D-Link DAP-2660 Quick Install Guide

System Requirements

Table of Contents

Show Quick Links

Table of Contents