Panasonic ty-cc10w Service Manual page 6

1 Troubleshooting Guide
1.1. How to diagnose the VIERA Communication Camera
You can carry out functional checks and diagnosis of the images (H.264) of the VIERA Communication camera (TY-CC10W) on a
PC by using exclusive diagnosis software.
1.2. Preparation for diagnosis
The following items are necessary for diagnosing the camera.
PC
Diagnosis software *
Camera to be checked
1.3. Diagnosis software setup and camera inspection
(For details, refer to Chap.2.)
1. Install diagnosis software (QTCam) on the PC.
2. Start the QTCam that you installed.
3. Insert the UBS cable of the camera (TY-CC10W) into the USB port on the PC.
4. Set the image (H.264) output of diagnosis software and check the image output on the camera.
Check real-time images of the camera.
(For the setup method, etc., refer to Chap.2.)
5. Set the audio output of the diagnosis software and check the audio output on the camera.
Check the output by talking into each of the four camera microphones and capturing the audio from each microphone.
(For the setup method, etc., refer to Chap.2.)
[Interface: USB 2.0]
[OS: Windows XP / Vista / 7]
[QTCam (QTCamFullSetup_20100615.exe)]
[VIERA Communication Camera (TY-CC10W)]
1