Operation procedures/pictures
8.1.4
Disassemble water tray
To take the movable latch of water tray and the
wire terminal that connect withelectric box, then
lift up the water tray,take out the swing motor
wire, can dis-assemble the water tray.
As show in Fig.8-4
8.1.5
Disassemble electric box
Remove the grounding wire of the evaporator,
and remove the temperature sensor for the pipe.
Remove the socket/plug connector for the in-
door motor and swing motor of the electric box.
Screw off the screws fixing the electric box with
a screw driver. Remove the electric box.
As shown in Fig.8-5, 8-6
Movable latch
Tube sensor
Screw
Room sensor
Hook
Screw
17
Motor wire
Water tray
Fig.8-4
Fig.8-5
Fig.8-6