Kenwood CD-3260M Service Manual page 9

INPUT KEY
UP Arm Motor Load operation.
DOWN Arm Motor Unload operation.
RANDOM Rotary Motor Clockwise turning.
DISPLAY Rotary Motor Counterclockwise turning.
POWER Check the transmission signal(Disc No.1 and Track
No.99) of the remote controller.
*DPF-J7020 only
REPEAT Playback PGM signal of the Track No.1,23 and 41 in the order.
And release the test mode.
CONFIRM Release the test mode.
(TIMER PLAY SW) Check the switch position.
(SL16/XS8 SW) Check the switch position.
4. Error code
DISPLAY
MECHA ERROR 01 No input of S3. The original position error of Disc Number.
MECHA ERROR 02 No input of S2. The turning direction error to counterclockwise
MECHA ERROR 03 No input of S1. The turning direction error to clockwise
MECHA ERROR 04 No input of main load sw.
MECHA ERROR 05 No input of main unload sw.
MECHA ERROR 06 No input of sub load sw.(CD-3280M)
MECHA ERROR 07 No input of sub unload sw.(CD-3280M)
MECHA ERROR 08 No backed up(AC power cord has disconnected).
S1-3:Mechanism address detector switch.
There are load and unload switches in the main pickup.
CIRCUIT DESCRIPTION
PROCEDURE
ERROR CONTENTS
SENSOR PCB
S2
S1
S3
S1 DISC 1~9
S2 DISC 10~99
S3 DISC 100~200
CD-3260M/3280M/DPF-J7020
DISPLAY
MOTOR LOAD
MOTOR UNLOAD
MOTOR CW
MOTOR CCW
TIMER ON , TIMER OFF
16BIT, 8BIT
9