Miscellaneous Error Messages - Lenovo 3000 K100 Hardware Maintenance Manual

Mscellaneous error messages
POST Error Message
Memory test fail
Press TAB to show POST screen
Error: Non-System disk or disk error
Replace and press any key when
ready
Message/Symptom
Changing display colors
Computer will not power-off. See
"Power Supply Problems"
Computer will not RPL from server
Chapter 6. Symptom-to-FRU Index
Description/Action
If POST detects an error during
memory testing, additional
information appears. This
information gives specifics about
the type and location of the
memory error.
Pressing the TAB key permits the
user to toggle between the default
POST display screen and a custom
POST display screen.
The BIOS was unable to find a
suitable boot device.
Make sure the boot drive is properly
connected to the computer.
Make sure you have bootable
media.
FRU/Action
Display/Monitor
1. Power Switch
2. System Board
3. Riser card, if installed
1. Ensure that network is in startup
sequence as first device or first
device after diskette
2. Ensure that network adapter is
enabled for RPL
3. Network adapter (Advise network
administrator of new MAC
address)