Exposure Comp; Metering Mode - Sony DSC-HX90V Manual

[68] How to Use

Exposure Comp.

Based on the exposure value set by auto exposure, you can make the entire image brighter
or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively
(exposure compensation). Normally, exposure is set automatically (auto exposure).
(Exposure Comp.) on the control wheel → press the left/right side of the
1. /
control wheel or turn the control wheel, and select the desired exposure range.
When using [Intelligent Auto] or [Superior Auto], you can display the settings screen
for [Photo Creativity] by pressing
You can adjust the exposure in a range of –3.0 EV to +3.0 EV.
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash,
you may not be able to get a satisfactory effect.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO]
is set to [ISO AUTO].
[69] How to Use

Metering Mode

Selects the metering mode that sets which part of the screen to measure for determining the
exposure.
1. MENU →
Menu item details
Multi:
Measures light on each area after dividing the total area into multiple areas and determines
the proper exposure of the entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the central area of
the screen (Center-weighted metering).
Spot:
Using shooting functions
Using shooting functions
(Camera Settings) → [Metering Mode] → desired setting.
Adjusting the exposure
/ .
Adjusting the exposure