Quick Install Guide; Physical Installation; Minimum System Requirements; Package Contents - D-Link DAP-3310 Quick Installation Manual

Quick Install Guide

This installation guide provides basic
instructions for installing the DAP-3310/
DAP-3410 Wireless N Exterior Access
1
Point on your network. For additional
2
information about how to use the Access
Point, please see the datasheet and user
manual available on the D-Link support
website.
DAP-3310 is a 2.4 GHz Single Band AP;
1
DAP-3410 is a 5 GHz Single Band AP.
The DAP-3310 and DAP-3410 support the IPX6 water/
2
dustproof standard. It is recommended that you place
the AP under a roof, shelter, or weatherproof container in
severe weather environments.

Minimum System Requirements

- Computer with Windows, Mac OS, or
Linux-based operating system, and an
Ethernet adapter installed
- Internet Explorer 7, Mozilla Firefox 12.0,
Safari 4.0, or Chrome 20.0 or newer

Package Contents

- DAP-3310/DAP-3410 Wireless N Exterior
Access Point
- PoE Injector
- Power Adapter (48 V/0.5 A)
- Pole Mount (Non-detachable)
- Wall Mount
- Two Plastic Mounting Ties
If any of the above items are missing,
please contact your reseller.
2  D-Link DAP-3310/DAP-3410 Quick Install Guide

Physical Installation

STEP 1: Connect an Ethernet Cable
the LAN (PoE) Port on the AP.
An Ethernet cable is not included in the package.
3
STEP 2: Mount the AP to a Pole or Wall
2A: Pole Mounting
2B: Wall Mounting
to
3