Behringer ddx3216 Instructions Manual page 7

•
The actual positioning of the sound source and its movement throughout the
surround space take place in the circle with the positions of surround
speakers indicated.
o The "+" in the middle represents the central point, that is, the optimal
listening position.
o The "x" indicates the current position of the sound source within the
surround space.
o The positioning of the sound source is done using both the ANGLE
parameters (Angle, -180°
DISTANCE (distance from middle point, -100
o If you only change the ANGLE parameter, you can let the sound source
circle in the surround space. This is done with the distance from the
middle point that was set using DISTANCE.
o If you want to move the sound source diagonally through the surround
space, you have to simultaneously modify the ANGLE and DISTANCE
parameters.
o If the DISTANCE value is smaller than 100 ("100" corresponds to
100% front, that is, completely in front, when ANGLE = 0°), the channel
signal is emanated out of all speakers, corresponding to the selected
share according to the positioning in the surround space.
•
The DIVERG. parameter stands for "divergence" and controls stereo width on
all 3 front speakers.
0° 180°) and DIST for
0 100).
6