Canon IXUS 1000 HS User Manual page 145

Changing the Lens Retract Time
For safety reasons, the lens retracts about 1 minute after pressing the 1
button when in a Shooting mode
immediately when you press the 1 button, set the retract time to [0 sec.].
Turning Off the Power Saving Function
You can set the power saving function
recommended to save battery power.
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically
also works when [Auto Power Down] is set to [Off].
Downloaded From camera-usermanual.com Canon Manuals
(p. 28). If you want the lens to retract
●
Choose [Lens Retract], then press the
qr buttons to choose [0 sec.].
(p. 51) to [Off]. Setting it to [On] is
● Choose [Power Saving], then press the m
button.
● Press the op buttons or turn the  dial
to choose [Auto Power Down], then press
the qr buttons to choose [Off].
●
If you set the power saving function to [Off],
be sure to turn the camera off after use.
● Choose [Power Saving], then press the m
button.
● Press the op buttons or turn the  dial
to choose [Display Off], then press the qr
buttons to choose a time.
●
In order to save battery power, you should
choose less than [1 min.].
Changing Camera Settings
(p. 51). This
145