Transporting The Printer - Canon BJC-820 Service Manual

BJC-8200

4. TRANSPORTING THE PRINTER

To prevent the ink from leaking or drying out in the BJ cartridge nozzles during
transportation, keep the BJ cartridge installed in the printer, or stored in the cartridge
container.
The ink tanks must be removed from the BJ cartridge and put into a vinyl bag while the
printer is being transported.
Transport the printer (for return after repair) with the carriage locked in place.
Refer to Part 2: 2.2.4 Precautions for transporting the printer (Page
4.1 Transporting the Printer
When transporting the printer, follow the procedures below:
1) Remove the ink tanks from the BJ cartridge and place in a vinyl bag.
2) Press the POWER button to turn off the printer. After the printer moves the carriage to
the home position for cleaning and locks the carriage in place, the indicator will go
out.
3) Disconnect the interface cable(s).
4) Unplug the AC power cord from the wall outlet.
5) Open the front cover and visually confirm that the carriage is locked in the capping
position (on the right side of printer). If the carriage is not in the capping position,
move it manually to the capping position by using the carriage belt, and secure it
there with tape.
6) Close the front cover.
7) Pack the printer in its original packing material. If the original packing materials are
not available, pack the printer in sufficient shock absorbing material.
CAUTION
Do not unplug the printer before switching off the printer with the POWER
button, otherwise, the BJ cartridge's nozzles will not be capped, which may
result in ink leaking or drying-out.
2-5).
2-13
Part 2: MAINTENANCE