Panasonic CF-25 Operating Instructions Manual page 9

Windows 95 Setup
(for beginners)
Startup screen
Shutdown
Click [Next].
1
Type your name and the name of your company, then click [Next].
2
The "License of Windows 95" should be displayed. Read through this
3
and then click [Next].
The License Agreement should be displayed. Read the Agreement,
4
check "I accept the agreement", and click [Next].
If you do not agree, turn the power off and bring the computer to
your nearest Panasonic Service Center.
Type in the product number printed on the Certificate of Authenticity;
5
the Certificate is attached to the "Introducing Microsoft Windows 95
book" included in the "Windows 95 system pack". Click [Next].
Click [Next] to configure your computer.
6
Click [Finish] to end the setup.
7
Read the instructions and click [OK]. Windows should restart.
8
At this point, you may have to install a disk to add necessary driver(s)
9
to your computer.
If you want to install your printer driver(s), click [Next]. Follow the
10
prompts on the screen to specify the printer(s). Otherwise, click [Can-
cel]. (Note: Printer drivers can also be added later.)
Set the correct time and click [Close]. (Note: The clock and time
11
zone are set to values used in Japan. These settings can also be changed
later.) Click [Next] to create system disks.
Create back-up disks of the software preinstalled in your computer with
12
"Microsoft Create System Disks". Be sure to have 37 2HD-type format-
ted floppy disks on hand. Please backup your disks in the following order:
Panasonic Tools Disk 1
Panasonic Tools Disk 2
CardWorks™ INSTALLATION Disk 1
DRIVERS DISK
TranXit Disk 1
TranXit Disk 2
Microsoft Windows 95 Setup disk
Follow the instructions that appear on the display.
13
You can turn your computer off by selecting "Shut Down..." from the
"Start" menu.
Startup and Shutdown
MEMO
You can also restart your computer in the MS-DOS
mode by selecting "Restart the computer in the MS-
DOS mode?"
9