Vivotek IZ9361-EH User Manual page 223

vadp_supportfeature
vadp_npackage
thermal_support
thermal_controlmode
thermal_temperaturedete
ction
camctrl_httptunnel
<Not support anymore>
camctrl_ptztunnel
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
auto, 0/7
customheater
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
An 32-bit integer, each bit can be set
separately as follows:
Bit 0 => VADP interface
Bit 1 => Capture video raw data
Bit 2 => Support encode jpeg
Bit 3 => Capture audio raw data
Bit 4 => Support event trigger
Bit 5 => Support license registration
Bit 6 => Support shared memory API
Bit 7 => Support digital signature of package
Bit 8 => Support snapshot
Indicate the maximum number of VADP
package that can be uploaded to the device.
Indicate whether to support thermal IC.
Indicate the thermal control mode.
"auto": control by camera automatically
"customheater": the threshold of heater can
be sepcified by user.
* only available when
"capability_thermal_support" is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
Indicate whether to support temperature
detection.
Indicate whether to support httptunnel.
* Not support this parameter anymore when
the version number (httpversion) is equal or
greater than 0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
Indicate whether to support ptztunnel.
* We support this parameter when the version
number (httpversion) is equal or greater than
0301b.
This equals
"capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
VIVOTEK
User's Manual - 223