Installation - Windows; Remove Existing Installations - D-Link DWA-582 Quick Install Manual

If you've installed a different manufacturer's adapter or a different model D-Link
adapter, make sure the software is uninstalled before installing the new software.
Some utilities may cause a conflict with the new software. If you plan to use
multiple adapters at different times, make sure the utilities are not set to load
when your computer boots up.
To remove old software, click Start > Control Panel > Uninstall Programs
WARNING: Do NOT install the adapter into your computer before installing
the drivers. You will be prompted to install your adapter during the setup.
Insert the DWA-582 Driver CD into the CD-ROM drive. When the autorun
1
screen appears, click Install and follow the on-screen instructions.
Note: If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive letter
of your CD-ROM drive) and click OK.
2
When the wizard instructs you to turn off your computer and install the PCIe
adapter into your computer, click Next and then Finish. Shut down your
computer and unplug the power.

Remove Existing Installations

Installation - Windows

3