Table of Contents
Advertisement
13. To install and connect the navigation computer
0
51
50
7
0
7
0
7
0
Retrofit / Installation kit No. 65 90 0 136 830
Installation Instructions No. 01 29 0 142 620
Connect branch C2, brown 8-pin socket casing on
0
the navigation computer adapter cable C, to
chamber B (50) on the navigation computer (7).
Connect branch C3, black 8-pin socket casing, to
chamber A (51) on the navigation computer (7).
C3
C2
039 0425 B
Connect branch D2, black 18-pin socket casing
0
on the navigation computer adapter cable D in the
centre to the slot on the navigation computer (7).
Connect the coaxial socket casing F2 on the GPS
aerial extension to the coaxial plug casing on the
navigation computer (7).
F2
D2
039 0426 B
0
9
Slide the navigation computer (7) into the
navigation computer holder (9) until it engages.
Then install the new boot trim for the rear left,
which you ordered separately using the Electronic
Parts Catalogue (EPC)
039 0427 B
Issue date: 10.2001
When inserting the navigation computer
ensure that you do not jam or damage any
cables or lines (including behind the
navigation computer).
EN/28
Advertisement
Table of Contents
