Audio Menu - Panasonic AJ-DCP Operating Instructions Manual

Setup Menus

AUDIO menu

Item
Superimposed
No.
display
700 CH1 IN LV
701 CH2 IN LV
702 CH1 OUT LV
703 CH2 OUT LV
704 EMPHASIS
705 MONI SEL
706 REC CUE
707 PB FADE
708 MONITOR MIX
709 H.PHONE MIX
710 CUE OUT SEL
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
0000 4dB For setting the audio input (CH1) reference level.
0001 0dB
0002 –3dB
0003 –20dB
0000 4dB For setting the audio input (CH2) reference level.
0001 0dB
0002 –3dB
0003 –20dB
0000 4dB For setting the audio output (CH1) reference level.
0001 0dB
0002 –3dB
0003 –20dB
0000 4dB For setting the audio output (CH2) reference level.
0001 0dB
0002 –3dB
0003 –20dB
0000 OFF For setting emphasis ON or OFF.
0001 ON
For setting the audio signals during playback.
0000 PLY PCM 0: PCM audio signals are output.
0001 PLY CUE 1: CUE audio signals are output.
For setting the audio input signals which are to be recorded on the cue
track.
0000 CH1 0: CH1 input signals are recorded.
0001 CH2 1: CH2 input signals are recorded.
0002 CH1+2 2: CH1 and CH2 input signals are mixed and recorded.
For setting the monitor output and headphone output sound during
playback.
0000 AUTO 0: The sound complies with the status during recording.
0001 CUT 1: The sound is forcibly cut.
0002 FADE 2: The sound is forcibly faded.
For setting the audio monitor output method. (This function works when the
audio monitor selector switch on the front panel is set to the ST position.)
0000 STEREO 0: The sound is output in stereo (with the left channel sound from the L
connector and right channel sound from the R connector).
0001 CH1+2 1: The sound is mixed (and mixed sound is output at both connectors).
For setting the headphone output. (This function works when the audio
monitor selector switch on the front panel is set to the ST position.)
0000 STEREO 0: The sound is output in stereo.
0001 CH1+2 1: The sound is mixed (when monaural headphones are used).
For setting whether the analog cue signals are to be output to the audio
output (main line system).
0000 OFF 0: The analog cue signals are not output.
PCM audio signals are output during playback; no sound is output in all
other modes.
0001 ON 1: The analog cue signals are output.
PCM audio signals are output during playback; analog cue signals are
output in all other modes.
36
Description of setting