Table of Contents
Advertisement
Analogue Manual Tuning
You can delete analogue channels and set the analogue channel
details.
After performing steps 1–4 (➡ 69)
5
Press [3, 4] to select "Settings for
Analogue Services" and press [OK].
6
While "Manual Tuning" is highlighted,
and press [OK].
Manual Tuning
Pos Name
Ch
Pos Name
1
ARD
4
11
2
ZDF
2
12
3
N3
5
13
4
HR3
8
14
5
BR3
10
15
6
16
7
17
SELECT
8
18
OK
9
19
RETURN
10
20
Delete
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
"Red" button.
∫ To change the tuning settings for individual
programme position
7
Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
Pos
Programme position in the table
(You cannot change the programme position.)
Name
To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel
To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press [OK].
Fine Tuning
To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [OK].
≥Press [1] to return to "Auto".
Mono
To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo or bilingual broadcast, and press
[OK].
Ch
Pos
1
Manual
Name
ARD
Tuning
Channel
4
Fine Tuning
Auto
Mono
Off
SELECT
RETURN
RETURN : leave
RQT8859
71
Hide quick links:
Advertisement
Table of Contents
