Troubleshooting; After-Sales Servicing; Specifications - Mitsubishi Lossnay VL-100U-E Operating Instructions Manual

Troubleshooting

Check the unit if any of the following problems occurs. If the problem is not listed below, or the prob-
lem persists after checking, contact your place of purchase being sure to first remove the power plug
from the wall outlet.
Problem
Unit does not operate.
Unit is making a strange noise.
Less air than normal is coming
out of unit.
If the power cord becomes damaged, request that your place of purchase replace the cord to prevent
an accident from occurring.

After-sales servicing

Contact your place of purchase for service of your Lossnay Ventilator.

Specifications

Model
VL-100U-E
Noise values may be higher than those listed depending on the structure of the room.
No power to main unit.
Panel or filter is not attached
securely.
Filter is clogged.
Shutter is closed.
Filter is clogged.
Shutter is closed.
Supply Power line
voltage frequency Notch
(V) (Hz)
220-240 50
220 60
Cause
Power Air
consumption volume
(W) (m 3
HI 26 105
LO 23 65
HI 26 90
LO 21 50
– 6 –
Check the following
• Check the power plug.
• Check that a circuit breaker
(fuse) has not tripped.
• Check a power failure has
not occurred.
Re-attach panel or filter.
Clean filter.
Open shutter.
Clean filter.
Open shutter.
Temperature Noise
exchange
/hr) efficiency (%) (dB)
70 39
77 29.5
73 37
80 26
Weight
(kg)
6.5