Disassembling The Clamp Base Unit; Disassembling The Clamper Weight, Clamper Yoke, Magnet And Clamper; Disassembling The Traverse Unit - Panasonic DVD-RV60 Service Manual

11.3. Disassembling the Clamp
Base Unit
1. Remove the 2 screws.
11.4. Disassembling the Clamper
Weight, Clamper Yoke, Magnet
and Clamper
1. Release the tab, and pull out the clamper.
2. Release the 3 tabs on the clamper.
11.5. Disassembling the Traverse
Unit
1. Remove the 3 screws.
Note
Be sure to take static electricitiy countermeasures befer
disconnecting the flexible cable.(Refer to section 4,
HANDLING PRECAUTIONS FOR TRAVERSE DECK.)
19
DVD-RV60