Connection - Panasonic DMP-BD50 Operating Instructions Manual

Connection

≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic's
HDMI cable.
Recommended part number:
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 (5.0 m/16.4 ft.),
etc.
≥When outputting 1080p signal, please use HDMI cables 5.0 meters or less.
Connecting to a television
A Connecting to HDMI AV OUT terminal
You can enjoy high quality, digital video and audio.
HDMI IN
HDMI cable
LAN
10BASE-T/
AV OUT 100BASE-TX
HDMI AV OUT
B Connecting to COMPONENT VIDEO OUT terminal
You can enjoy high definition images by connecting to a component video terminals that supports 720p (750p) and 1080i (1125i) signals.
Component
Video cable
Back of the unit
RQT9184
(ENG)
6
HDMI
compatible
television
COMPONENT VIDEO OUT
DIGITAL AUDIO
COAXIAL
OUT Y
( PCM/BITSTREAM )
Please
connect
directly
to TV.
OPTICAL
S VIDEO OUT VIDEO OUT
Back of the unit
AUDIO IN
COMPONENT
VIDEO IN R L
AUDIO OUT
COMPONENT VIDEO OUT
DIGITAL AUDIO
COAXIAL L FRONT L /L SURROUND
OUT Y P
B
( PCM/BITSTREAM )
Please
connect
directly
to TV.
P
R R FRONT R /R
OPTICAL
S VIDEO OUT VIDEO OUT
2ch
AUDIO OUT
L FRONT L /L SURROUND CENTER
P
B
L
R
P
R R FRONT R /R SUBWOOFER
2ch 5.1ch
Television
Audio/Video cable
(included)
CENTER
L
R
SUBWOOFER
5.1ch
NECESSARY SETTINGS
≥"HDMI Video Mode" and "HDMI
Audio Output" : "On" (
NOTE
To enjoy a richer sound
≥Use connections E, F or G
( 7, 8) additionally.
TIPS
In case of the connection F or G,
set "HDMI Audio Output" to "Off"
( 28)
With this connection, you can use
VIERA Link "HDAVI Control"
( 23).
≥Connect terminals of the same
color.
≥Unplug the yellow plug of Audio/
NOTE
Video cable.
≥Set "Black Level Control" to
"Darker". ( 26)
≥The video output resolution is
restricted to "480p" when
DVD-Video is output from the
COMPONENT VIDEO OUT
terminals.
To enjoy high definition/
progressive video
≥Connect to a television that
supports 480p or higher.
TIPS
≥Set "Component Video Resolution"
to "480p", "720p" or "1080i". (
≥Set "HDMI Video Mode" to "Off".
( 28)
Otherwise, the video is output as
480i.
28)
28)