Installing The Software 2; Installing Simple Viewer - Panasonic LUMIX VQT1D44 Operating Instructions Manual

Installing the Software 2

Installing Simple Viewer

• This installation is not required on the 2nd and later connections.
• Before inserting the CD-ROM, close all running applications.
1.
Insert the CD-ROM.
The setup menu will start.
2.
Click [LUMIX Simple
Viewer].
3.
Proceed with installation
according to messages
appearing on the screen.
• Only when Windows 98SE is used,
MDAC2.8 (Microsoft Data Access
Components 2.8) may also be installed.
Install it according to messages shown
on the screen.
Setting up
• Before first use following the completion
of installation, be sure to select
[Readme] from [start] >> [All programs]
>> [Panasonic] >> [LUMIX Simple
Viewer] to read additional information.
• Simple Viewer is installed in the following
folder. (It cannot be changed.)
C:\Program Files\Panasonic\
LUMIXSimpleViewer
If the setup menu does not start
automatically:
• Double-click [My Computer] on the
desktop, double-click or open
[VFFXXXX] (part No. XXXX varies by
model), and double-click [InstMenu.exe].
If Simple Viewer cannot be installed:
• If Windows 2000/XP is used, you cannot
install when you have logged on to the
PC as a Limited Account user. Log on as
an Administrator Account user and install
again. For details, refer to the operating
instructions for the PC.
7
VQT1D44