Troubleshooting; Specifications; Error Message; What To Do When - Brother P-Touch PT-M95 User Manual

Troubleshooting

Specifications

Troubleshooting

Error message

Message
The batteries are weak. Replace them with four new AAA alkaline batteries. Do not use old and new batteries together or mix alkaline
Low Battery!
batteries with other battery types.
Full!
You have already entered the maximum number of characters allowed (80 characters for regular text, or 50 characters for DECO MODE).
• You tried to print a text file when there is no data stored in the memory.
• You pressed
• You pressed
No Text!
• You tried to select [Copies] when no text is entered.
• You pressed
Line Limit!
You tried to enter a third line by pressing
Invalid!
You selected an invalid number for [Label Length].
• The text length exceeds the selected label length.
Text Limit!
• The text length exceeds 200mm when you set [Label Length] to [Auto] in DECO MODE.
• If you select the minimum label length (30mm), some frame types (Leaf or Star) do not allow you to enter additional text.
If the print head becomes too hot, your label maker stops printing and automatically starts to cool down. The cool down time is displayed.
Cooling XXX
When the print head is cool, printing automatically continues. Do not touch the label maker while cooling.

What to do when...

Problem
The display stays blank after you have turned on
the label maker.
The label maker does not print, or the printed
characters are not formed correctly.
The label maker's settings have cleared on its own.
A blank horizontal line appears through the printed
label.
The label maker has “locked up” (that is, nothing happens
when you press a key, even though the label maker is on.)
The power turns off when you try to print.
The tape does not feed correctly or the tape gets
stuck inside the label maker.
All text and format settings must be cleared to
create a new label.
To change language setting
Specifications
Dimensions: Approx. 156 × 111 × 61mm
(W × D × H)
Weight: Approx. 250 g (without batteries and tape cassette)
Awesome support comes standard with us.
So if you ever consider returning this product, contact us first at:
www.brother.ca/support
Live Chat with us or reach us on facebook.com/brothercanada
or twitter.com/Brother_Support
Contact Information Website: www.brother.ca
when no text is entered.
when no text is entered.
when no text is entered in the text entry screen of DECO MODE.
(Maximum printable lines is two).
• Check that you installed the batteries correctly with the positive and negative ends in the correct position.
• If the batteries are weak, replace them with four new AAA alkaline batteries. Do not use old
and new batteries together or mix alkaline batteries with other battery types.
• Check that you have inserted the tape cassette correctly.
• If the tape cassette is empty, replace it.
• Check that you closed the cassette cover correctly.
• The batteries may be weak. Replace them with four new AAA alkaline batteries. Do not use
old and new batteries together or mix alkaline batteries with other type batteries.
• When power is disconnected for more than three minutes, all text, format settings, and any
text files stored in the memory are cleared. Language and Unit settings are also cleared.
There maybe some dust on the print head. Remove the tape cassette and use a dry cotton
swab to gently wipe the print head with an up-and-down motion.
See “Resetting the label maker”.
• The batteries may be weak. Replace them with four new AAA alkaline batteries. Do not use
old and new batteries together or mix alkaline batteries with other battery types.
• Check that you inserted the batteries correctly.
• Remove the M tape from the label maker and ensure the tape feeds under the tape guides.
• You used the cutter lever while printing. Do not touch the cutter lever while the message
“Printing…” or “Feeding…” is displayed.
Press
See “Initial Settings”.
Cause/Remedy
Solution
while holding down , or go into Function mode and select
Power supply: Four AAA alkaline batteries (LR03)
Tape cassette: Brother P-touch M tape widths: 9mm, 12mm
.