Panasonic HDC-SD9D Operating Instructions Manual page 38

To record still pictures clearly
≥ While recording motion pictures or during
the PRE-REC operation, the following
arrangements are applied so that motion
picture recording takes preference over still
picture recording. For vivid still pictures, we
recommend pausing motion picture
recording and taking still pictures after
releasing the PRE-REC mode.
jImage quality is different from ordinary still
pictures.
jPressing the
disabled.
jThe remaining usable capacity (number of
pictures that can be taken) indication does
not appear.
≥ You can record stable pictures without
shaking by using a tripod and the remote
control. (When a remote control is used,
pressing the button halfway is
disabled.)
≥ For information about the number of
recordable still pictures (l 39)
≥ The sound cannot be recorded while recording
still pictures.
≥ The edges of still pictures recorded on this unit
with a 16:9 aspect ratio may be cut at printing.
Check the printer or photo studio before
printing.
38
VQT1N58
button halfway is
∫ About the screen indications
when the
2.1
ß: Flash (l 51)
ßj: Flash level (l 51)
: Red eye reduction (l 51)
: Quality of still pictures (l 39)
Size of still pictures
:
2.1
Ｍ
3000: Remaining number of still pictures
(Flashes in red when [0] appears.)
: Card indication (l 105)
: MEGA optical image stabilizer
MEGA
(l 41)
∫ About the focus indication
≥ The focus indication indicates the status of the
auto focus.
≥ The focus indication does not appear in
manual focus mode.
≥ You can record still pictures even if the focus
indication does not appear, but pictures may
be recorded without being focused.
≥ The focus indication does not appear or has
difficulty focusing in the following cases.
jWhen the zoom magnification is high.
jWhen the unit is shaken.
jWhen the subject is moving.
jWhen the subject stands in front of a light
source.
jWhen close subjects and far subjects are
included in the same scene.
jWhen the scene is dark.
jWhen there is a bright part in the scene.
jWhen the scene is filled with only horizontal
lines.
jWhen the scene lacks contrast.
jWhen the colour night view function is used.
button is pressed
3000 3000 3000
MEGA
Ｍ