Panasonic DMP-UB900 Owner's Manual page 9

∫ Front
1
1 Disc tray
2 Display
3 SD card slot
When removing the SD card, press the center
of the card and pull it straight out.
4 USB port ( DC 5 V 500 mA)
5 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and
this may cause malfunction.
≥ When inserting a media item, ensure that it is facing the correct way, which is the right side facing up.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected
equipment. For details, refer to the instructions for the connected equipment.
∫ Rear
1
1 AC IN ( ) terminal (
2 LAN port ( 16)
3 HDMI AUDIO OUT terminal (
4 HDMI VIDEO OUT terminal (
5 2ch AUDIO OUT terminals (
6 7.1ch AUDIO OUT terminals (
2 3 4 5
8
2
10)
11)
10)
12)
12)
6
6 Open or close the disc tray*
7 Standby/on switch* (Í/I) (
Touch to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
* These buttons work just by touching the marks.
Do not place any objects on or around the buttons.
9 10
3 4 5
7 OPTICAL/COAXIAL terminal
(DIGITAL AUDIO OUT terminals) (
8 Cooling fan
9 HDMI OUT terminal
10 Analog AUDIO OUT terminals (
Class II equipment (The construction of the product is
double-insulated.)
7
Pull to flip down
the front panel.
17)
6 7
12)
12)
TQBA2018
9