When Replacing The Main Pcb; Service Position - Panasonic Lumix DMC-TZ1EB Service Manual

7.2.

When Replacing the Main PCB

After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at "software download" on the "Support Information from NWBG/VDBG-PAVC" web-site in
"TSN system", together with Maintenance software.
7.3.

Service Position

This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
No. Parts No.
1 VFK1950
2 VFK1575C5125
3 VFK1974
4 RFKZ0378
5 VFK1951
6 RFKZ0379
CAUTION-1. (When servicing POWER/TOP PCB)
1. Be sure to discharge the capacitor on POWER/TOP PCB.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON POWER/TOP PCB".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on POWER/TOP PCB.
3. DO NOT allow other parts to touch the high voltage circuit on POWER/TOP PCB.
Table S1 Extension Cable List
Connection
FP6501 (SD/AFE) -CCD UNIT
FP9001 (MAIN) - POWER/TOP FPC
FP9002 (MAIN) - LCD UNIT
FP9003 (MAIN) - LCD UNIT
FP9004 (MAIN) - BASE SU
PP6501 (SD/AFE) - PS9001 (MAIN)
19
Form
33PIN 0.3 FFC
51PIN 0.3 FFC
4PIN 0.5 FFC
19PIN 0.5 FFC
39PIN 0.3 FFC
40PIN B to B