Re-Registering A Remote Camera As A Local Camera - Panasonic BL-WV10A Operating Instructions Manual

2.5 Re-registering a Remote Camera as a Local
Camera
There are 2 ways to re-register remote cameras within the network as a local
camera. (For definitions of local and remote cameras, see page 22.)
1.
Access the camera with a computer and change its user name and password
to match the administrator name and password for the BL-WV10A that you set
during Basic Setup.
2.
Erase the camera from the camera list (see page 118).
3.
Re-register the camera using Quick Setup (see page 26, page 35, or page 47
depending on your connection method).
Or...
1.
Erase the registration from the camera list (see page 118).
2.
Revert the camera to its default settings.
3.
Re-register the camera using Quick Setup (see page 26, page 35, or page 47
depending on your connection method).
[For assistance, please call: 1-800-272-7033]
2 Connecting Cameras
53