Manual Pairing - iHome iBT682 Instruction Manual

Bluetooth: Pairing Your Device the First Time
Pairing is the set-up process to introduce your Bluetooth-capable device to
the iBT682. Once your device is paired, the speakers can recognize it and you
can play your audio through them. Turn on your Bluetooth device and make
it "discoverable" by turning on Bluetooth mode (check in Options or Settings).
• The first time both speakers are turned on, after establishing the True Wireless
link, the speakers will enter auto-pairing mode and attempt to connect to a
Bluetooth device. The status indicator light on the top of each speaker will
flash quickly and the left speaker will flash blue.
• "iHome iBT682" should appear in your device's Bluetooth menu. Select "iHome
iBT682" to connect it. If prompted for a passcode, enter "1234" on your device's
keypad.
If pairing is successful, 1 beep will
sound and the status indicator
light will appear solid on each
speaker, indicating the iBT682 is
ready to play music. There should
also be an indication on your
device. If no device is successfully
paired within 3 minutes the
iBT682 will default to standby
mode. Once the iBT682 is paired
to a device, it will attempt to
autolink when the device is
within Bluetooth range (about
33 feet).

Manual Pairing

1.
2.
3.
Slide the Power Off/On Switch on each speaker to ON. True
Wireless linking should take about 10 seconds.
Press and hold the Bluetooth Button (located on the back) on
the left speaker for 2 seconds.
Select "iHome iBT682" on your device's Bluetooth menu to
complete pairing.
Using the
iHome iBT682
For iPhone
iHome iBT682
For other
iBT682
iHome iBT682
iHome iBT682
6