Specifications; System Connections; What To Do If - Sanyo DC-DA280 Service Manual

SPECIFICATIONS

Tuner
Reception frequency
FM : 87.5 - 108.0 MHz
AM: 522 - 1710kHz (9 kHz step)
CD player
Channels ................................ 2-channel stereo
Sampling frequency ............... 44.1 kHz
Pick-up ................................... Optical 3-beam
Laser output ........................... 0.6mW(Continuous wave max.)
Wave length ........................... 790 nm
Wow and Flutter ..................... Below measurable limits
Cassette deck
Track system ......................... 4-track, 2-channel stereo
Frequency response .............. 80 Hz - 15 kHz
Signal to noise ratio ............... 40 dB
Wow and Flutter ..................... 0.15% (WRMS)
Fast forward / Rewind time .... Approx. 110 sec. (C-60)

SYSTEM CONNECTIONS

R ch speaker L ch speaker

WHAT TO DO IF

If the operation of the unit or display is not normal,
1. Disconect the mains lead.
2. Press the
3. Connect the mains lead.
4. Operate the unit.
520 - 1710kHz (10 kHz step)
semiconductor laser
button on the unit for at least 30 seconds.
General
Output power ......................... 4W x 2
Outputs .................................. SPEAKERS : 4 ohms
Power requirements ............... AC 240V, 50Hz(AU)
Power consumption ............... 21 W
Dimensions (W x H x D) ........ Approx. 150 x 230 x 205 mm
Weight .................................... Approx. 2.3 kg
Speaker system
Type ....................................... Full range bass reflex
Unit used ................................ 10 cm cone type
Maximum
power-handling capacity ..... 8 W (peak)
Nominal impedance ............... 4 ohms
Dimensions (W x H x D) ........ Approx. 145 x 230 x 170 mm
Weight .................................... Approx. 1.2 kg (per speaker)
Specifications subject to change without notice.
Video/ Auxiliary equipment
To an AC outlet
- 1 -
(at 4 ohms, 10% distortion)
PHONES : 8 - 32 ohms
AC 220V, 60Hz(KR)
AM loop aerial
FM aerial