Formatting The Setup Card - Panasonic AJ-HDC27FP Operating Instructions Manual

Setup card operations
The operations for saving setting data on the setup
card and loading the saved data from the card are
performed on the CAM CARD READ/WRITE screen
of FILM (CAM) MAIN MENU 3.

Formatting the setup card

1
Perform the menu operations (pages 84 to 86),
and display the "CAM CARD READ/WRITE"
screen.
n < C A M C A R D R E A D / W R I T E >
S E L E C T
R E A D
S E L E C T
W R I T E
C A R D C O N F I G
T I T L E R E A D
R E A D U S E R D A T A
T I T L E :
1 :
2 :
3 :
4 :
2
Turn the JOG dial button to move the arrow
(cursor) to the CARD CONFIG item.
< C A M C A R D R E A D / W R I T E >
S E L E C T
R E A D
S E L E C T
W R I T E
n C A R D C O N F I G
T I T L E R E A D
R E A D U S E R D A T A
T I T L E :
1 :
2 :
3 :
4 :
3
When the JOG dial button is pressed, the following
message appears on the screen.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
C O N F I G ?
Y E S
N O
n
: 1
: 1
5 :
6 :
7 :
8 :
: 1
: 1
5 :
6 :
7 :
8 :
: 1
: 1
:
4
To proceed with the formatting of the setup card,
turn the JOG dial button to move the arrow (cursor)
to YES, and press the JOG dial button. When the
formatting of the card is completed, the following
message appears.
<Note>
When the card is formatted, the settings statuses
applying at the time are also saved in the memory.
< C A M C A R D R E A D / W R I T E >
R E A D
S E L E C T
W R I T E
S E L E C T
C A R D C O N F I G
R E A D U S E R D A T A
T I T L E
C O N F I G O K
If one of the following messages appears when the JOG dial
button is pressed, the card will not be formatted.
Error message
CONFIG NG
NO CARD
(setup card has not been
inserted)
CONFIG NG
ERROR
(the card cannot be formatted)
5
Press the MENU button to exit the menu
operations.
The setting menu is cleared, and the displays
showing the unit's current statuses appear at the
top and bottom of the viewfinder screen.
<Note>
Data titles cannot be recognized when the setup
card was inserted
READ/WRITE screen was open. Move the arrow
(cursor) to the TITLE READ item, and press the
JOG dial button.
The data title is recognized, and the title is
displayed.
73
: 1
: 1
:
Remedial action
Insert the card.
The card may be defective.
Replace it.
while the CAM CARD