Ch Search; Direct Programme Number Selection; Two Digit Programme Number Selection - Panasonic TX-86PW200A Operating Instructions Manual

Remote Control Television Operation
BUTTON
Please refer to drawing on Page 8 for location of Remote Control Buttons.

CH SEARCH

This option is used to show freeze frames of the programmes being broadcast on
all the stored channels. The images are displayed clockwise around the edge of
the screen starting from the top left corner. The current programme is displayed in
the centre of the screen. When the display gets back to the top left corner it will
overwrite the first picture with the next one in series.
The display will continue to change until either the
or is pressed to exit the feature.
The Red button is used to select each programme in turn. The green button is
used to swap the main display between the current programme and the one
selected by the red button. The Blue button returns to normal viewing.
1 3
2
5
6
SELECT OK
Notes: Skipped channels are not shown.
When all the programmed channels have been displayed, the television
will restart the display starting from the top left corner.

DIRECT PROGRAMME NUMBER SELECTION

Single Digit Programme Numbers (0 to 9) can be accessed directly by pressing
the corresponding number on the Remote Control Transmitter.

TWO DIGIT PROGRAMME NUMBER SELECTION

To directly access Programme Numbers 10 to 99, press the "- / - -" Button followed
by the two digits required. For example, to select Programme Number 12:
The On-Screen display will be as shown:
_ _
WHAT IT DOES
RED GREEN YELLOW BLUE
4
SELECT
EXIT
1_ 12
button is pressed to pause
OK EXIT