Installation Instructions; Reversing The Door Swing; Before You Start; To Remove Doors - GE GTE21GTHWW Quick Use Manual

REVERSING THE DOOR SWING

BEFORE YOU START

• Unplug the refrigerator from its electrical outlet.
• Empty all door shelves, including the dairy compartment.
NOTICE: Do not let either door drop to the floor. To do so could damage the door stop.

TO REMOVE DOORS

1. Remove top hinge.
2. Lift off freezer door.
3. Remove the center hinge pin, hinge and gasket.
4. Lean the fresh food door forward and lift door off of lower hinge pin.
STAINLESS STEEL HANDLE
TRANSFER FREEZER DOOR HANDLE TO THE RIGHT SIDE OF
THE REFRIGERATOR DOOR AND THE REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE FREEZER DOOR
6a. Remove handle screws from the top of fresh food door. Remove
handle screws from the bottom of freezer door.
7a. Loosen set screw on handle with the provided 1/8" wrench.
8a. Remove door handle.
9a. Change places between the handle fastener and plug button on
door front.
10a. Move the plug buttons on top and front of the door to fill the
now vacant holes.
11a. Transfer the door stop on the bottom of the door.
12a. Attach freezer handle to fresh food door with screws at top of
handle. Use 1/8" allen wrench to tighten set screw at bottom of
handle.
13a. Attach fresh food handle to freezer door with screws at bottom
of handle. Use the provided 1/8" allen wrench to tighten set
screw at top of handle.
14a. Attach badge on freezer door opposite the handle.
PLASTIC HANDLE ASSEMBLY
TRANSFER FREEZER DOOR HANDLE TO THE RIGHT SIDE OF
THE REFRIGERATOR DOOR AND THE REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE FREEZER DOOR
6b. Remove handle screws from the top of fresh food door. Remove
handle screws from the bottom of freezer door.
7b. Remove door handle on fresh food door by sliding the handle
up off of the fastener. Remove door handle on freezer door by
sliding the handle down off of the fastener.
8b. Change places between the handle fastener and plug button on
door front.
9b. Move the plug buttons on top and front of the door to fill the
now vacant holes.
10b. Transfer the door stop on the bottom of the door.
11b. Attach freezer handle to fresh food door by sliding handle down
onto fastener and with screws at top of handle.
12b. Attach fresh food handle to freezer door by sliding handle up
onto fastener and with screws at bottom of handle.
13b. Attach badge on freezer door opposite the handle.

Installation Instructions

3
Top hinge
Hinge
bracket
Center
Hinge Pin
Center Hinge
Gasket