Driver Information Display (Did) - Dodge 2016 CHALLENGER User Manual

DRIVER INFORMATION DISPLAY (DID)

The DID features an driver display that is located in the instrument cluster. Pushing the
controls on the left side of the steering wheel allows the driver to select vehicle information
and Personal Settings. For additional information, refer to "Programmable Features" in
this guide.
• Push the UP
through the main menus (Speedometer,
MPH/km/h, Vehicle Info, Terrain, Driver
Assist, Fuel Economy, Trip A, Trip B,
Audio, Stored Messages, Screen Set
Up).
• Push the DOWN
downward through the main menu and
submenus (Speedometer, MPH/km/h,
Vehicle Info, Terrain, Driver Assist, Fuel
Economy, Trip A, Trip B, Audio, Stored
Messages, Screen Set Up).
• Push the RIGHT
information screens
screens of a main menu item.
• Push the LEFT
information screens
screens of a main menu item.
• Push the OK button to access/select the information screens or sub-menu screens of a
main menu item. Push and hold the OK button for two seconds to reset displayed/
selected features that can be reset.
PERFORMANCE FEATURES
Overview Of Performance Features
Measurement of vehicle statistics with the Performance Features is intended for
off-highway or off-road use only and should not be done on any public roadways. It is
recommended that these features be used in a controlled environment and within the
limits of the law. The capabilities of the vehicle as measured by the performance pages
must never be exploited in a reckless or dangerous manner, which can jeopardize the
user's safety or the safety of others. Only a safe, attentive, and skillful driver can prevent
accidents.
button to scroll upward
button to scroll
button to access the
or sub-menu
button to access the
or sub-menu
WARNING!
E L E C T R O N I C S
1 — DID Controls
135